Full Door Rack - Sprinter 2019+

Full door support for Sprinter 2019+. This tubular support allows the installation of small and medium-sized boxes, as well as the possibility of installing a large ski and snowboard box. It is possible to add perforated panels (sold separately) in the lower and/or upper section for the installation of various practical accessories such as wood baskets, Maxtrax, Rotopax and others. The supports follow the opening movement of the doors, facilitating access to the interior of the vehicle.

The brackets install on 180 degree rear door hinges (not compatible with 270 degree hinges); installation requires only two holes, not visible behind the Mercedes logo. A set of two 10-inch support arms with 1.5-inch diameter tube mounts are included with each bracket.

Designed and manufactured in Quebec.

Specifications:

• 6061 Aluminum Bracket
• Fully TIG welded aluminum construction
• Load capacity of 200 lbs, including weight of the rack
• Weight of bracket with fixing and hardware: 24 lbs
• 308 Stainless Steel Hinge Bracket Fixing
• Stainless Steel Fastening Hardware
• Textured black powder coat baked paint
  
• Requires drilling of 2 holes for mounting
• Designed for VS30 vans (2019 and later) 2500, 3500, 4x4 & 4x2
  
• 2 x 10 inch support arms with 1.5 inch diameter tube mount are included with each bracket.

Warnings:

• Do not add additional items such as fuel cans or similar to the exterior side of the box. This will void your warranty as it significantly increases the leverage of the weight when closing the door.
• When fully charged, the door should be closed with intention, not slammed.
• Overloading boxes or accessories may damage doors and hinges, and this will void your warranty.
• Not recommended for electric bikes
• May cause reversing sensors to beep when reversing (varies by van)

Assembly :

At our facility, installation is priced at $150 for each door, with an estimated time of 1 hour per door.

Production time:

At Phlö System, all our products are made to order, requiring a production time of 6-8 weeks. After your pre-order, we will contact you with additional information.

Delivery :

This product requires installation exclusively in the Quebec City area. After your pre-order, the Phlö System team will contact you to verify the feasibility of your project and plan the installation.